If you’re planning on installing a new showerhead, one of the first things you’ll need to do is determine the rough-in height. This is the distance from the finished wall surface to the center of the shower valve.
The standard rough-in height for showerheads is 80 inches, but it’s always best to measure just to be sure. The average shower head rough in height is between 60 and 80 inches. This means that the center of the shower head should be between 60 and 80 inches above the finished floor.
In this article, we’ll show you how to measure the rough-in height for your showerhead installation. We’ll also provide some tips on selecting the right showerhead for your bathroom.
What is the standard shower head rough in height?
If you’re planning on installing a new shower head, one of the things you’ll need to know is the standard shower head rough in height. This is the measurement from the finished floor to the center of the shower head. Most shower heads are designed to be installed at a rough in height of 60 inches, but there are some that are designed for a rough in height of 80 inches. Knowing the standard shower head rough in height will help you ensure that your new shower head is installed at the proper height.
Why is this height important?
There are a few reasons why the standard shower head rough in height is important. First, it ensures that the shower head is installed at the proper height for comfortable use. Second, it helps to prevent water from spraying out of the shower head and onto the floor or walls. And third, it helps to ensure that the water pressure is adequate for a comfortable shower.
If you’re installing a new shower head, be sure to measure the rough in height before you purchase the shower head. This will ensure that you get the proper height for your shower head.
How to Measure for the Perfect Shower Head Height
When installing a new showerhead, it’s important to make sure that it’s installed at the proper height. The rough-in height is the distance from the finished floor to the center of the showerhead. To properly measure the rough-in height, you’ll need a tape measure and a level.
Start by measuring the distance from the floor to the center of the showerhead. Use a level to make sure that the showerhead is level. If it’s not, make a mark on the wall so that you know where to level it off. Once you have the rough-in height measurement, you can install the showerhead at the proper height.
Some common mistakes when installing a showerhead
If you’re planning on installing a new showerhead, there are a few common mistakes you’ll want to avoid. First, make sure you have the right tools for the job. A good adjustable wrench will come in handy to loosen or tighten the connection. Next, take a close look at the showerhead connection before you begin. If it’s damaged, you may need to replace it before proceeding.
Once you have the right tools and a good understanding of the connection, it’s time to start the installation. Make sure you’re careful not to overtighten the connection, as this can damage the showerhead or the plumbing. If you’re not sure how tight to make it, err on the side of caution and stop when you feel resistance. Once the showerhead is installed, test it out to make sure the water pressure is adequate and there are no leaks.
If you keep these tips in mind, you should be able to install your new showerhead without any issues.
- How high should a shower head be installed?
Most shower heads should be installed between 6 and 8 feet above the floor.
- How high can a shower head be installed?
Shower heads can be installed up to 10 feet above the floor, but anything over 8 feet may be uncomfortable for taller users.
- How much does a shower head rough in cost?
A shower head rough in typically costs between $25 and $50.
Most rough-ins for shower heads are between 60 and 80 inches, with the majority of them being right around 70 inches. The height of your rough-in will depend on the size of your shower and where the plumbing is located. If you’re not sure what height you need, ask a professional before you start your project.