How to identify the old Moen shower valve

The Moen shower valve is used to control the flow of water in a shower. It is a valve that is located at the point where the water supply enters the shower and is used to regulate the flow of water to the shower head.

If you have an old Moen shower valve, you can identify it by looking for the Moen logo on the valve. If you see the Moen logo, you can be sure that your valve is an old Moen shower valve. If you don’t see the Moen logo, you may have a different type of valve.

In this article, we’ll go over how to identify an old Moen shower valve. We’ll cover the Moen logo, the style of the handle, and the model number. After reading this article, you should be able to identify an old Moen shower valve with ease!

Why it’s important to identify your old Moen shower valve

If you have an old Moen shower valve, it’s important to identify it so you can find the right replacement parts. The first thing you need to do is locate the model number. This is usually stamped on the body of the valve, near the handle. Once you have the model number, you can use it to look up the correct replacement parts.

If you don’t identify your old Moen shower valve, you could end up with the wrong replacement parts. This could cause your shower to leak or not work properly. In the worst-case scenario, it could even cause serious damage to your home. So, take the time to identify your old Moen shower valve before you start shopping for replacement parts. It could save you a lot of time, money, and hassle in the long run.

Old Moen shower valve identification

If you have an old Moen shower valve, there are a few ways to identify it.

First, look for the Moen logo on the valve. This is usually a small sticker or embossed on the valve. If you don’t see the logo, you can also look for the words “Moen” or “Moen USA” on the valve.

Another way to identify an old Moen shower valve is to look for the date code. This is usually a four-digit code that is stamped on the valve. The first two digits represent the year, and the last two digits represent the week of the year.

Conclusion

If you need to replace your Moen shower valve, it is important to know how to identify an old one. There are a few things to look for, including the date code and the model number. The date code will tell you when the valve was manufactured, and the model number will help you find the right replacement parts. With these two pieces of information, you can be sure to get the right valve for your shower.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *